Shenzhen Melasta Battery Ltd
Ni-MH, Li-Po, Li-ion, LiFePO4 for different industry segments
Add to Cart
Features :
1. No memory effect
2. No leakage and no explosion.
3. Environment-friendly
4. Low internal resistance
5. CE,KC, UN, and RoHS approved
6. Rapid charge-discharge cycle life up to more than 500 times.
| Package | MELASTA Li-Po Battery Pack: 36V 10Ah (360Wh ,10A) with PCM |
| Output voltage | 36V working voltage, peak voltage @43.8V,30V cut-off |
| Battery Capacity | 10Ah(360 Wh) |
| Cycle life | > 500 cycles (80% of initial capacity @ 0.2C rate, IEC Standard) |
| Protection | One PCM (30A/60A limited) installed with the battery pack and protects the battery from |
| Overcharge (> 43.8 V) | |
| Over discharge (<30V) | |
| Over drain ( > 30Amps) | |
| Short circuits | |
| Must wait min of 30 minutes after battery is fully charged to allow the PCM to perform balance function on all the cells within the pack. | |
| Prewired | 255mm long 12AWG open end wire |
| Red = Positive | |
| Black = Negative | |
| Charging rate | 10 A Max |
| Max. Discharging Rate | 10A continuous limited by PCM |
| 30A < 30 seconds limited by PCM | |
| Charging temperature: | 0 to 45 degrees Celsius |
| Discharge temperature: | -20 to 70 degrees Celsius |
| Storage temperature: | -20 to 40 degrees Celsius |
| Pack size (LxWxH) | (250Lx 135W x 41H)mm |
| Weight | approx.2520 grams |
| Cycle life is 4-5 times more than NiMH pack, so it is much economic | |
| Smart Tips | Please use MELASTA charger below for fully recharge battery pack. |
| Smart Charger (2.8A) for 36V Li-Po Battery Pack, 110-240V --- CE listed | |
| Applications | E-bike,E-scooter,Wheelcharis,Power tolls,UPS,etc. |
| Warning | Please negotiate with MELASTA technicians to learn more Knowledge on Li-Po battery . |